Hey folks: I'm struggling with an ISDN issue in which the call comes up, but then is immediately dropped without the interesting traffic being sent. I'm an ISDN neophyte, so I'm more than willing to admit a config error on my part, but from what I can see, my first thought is that it's a provider issue. Anyone ever experienced this before?
Thanks, BJ Debug dialer shows: Jul 3 15:02:14.261: BR0/0 DDR: Dialing cause ip (s=w.x.y.z+1, d=w.x.y.z) Jul 3 15:02:14.261: BR0/0 DDR: Attempting to dial (number).. Jul 3 15:02:17: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up Jul 3 15:02:18: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to (number) Jul 3 15:02:18: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down Jul 3 15:02:18.045: BR0/0:1 DDR: disconnecting call Debug isdn q921 shows: Jul 3 15:05:35: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to (number) Jul 3 15:05:35: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from (number) , call lasted 1 seconds Debug isdn q931 shows: Jul 3 15:08:03.270: ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x0C Jul 3 15:08:03.270: Bearer Capability i = 0x8890218F Jul 3 15:08:03.274: Channel ID i = 0x83 Jul 3 15:08:03.274: Keypad Facility i = 'number' Jul 3 15:08:03.470: ISDN BR0/0: RX CONNECT_ACK pd = 8 callref = 0x0C Jul 3 15:08:07.354: ISDN BR0/0: RX RELEASE pd = 8 callref = 0x0C Jul 3 15:08:07.402: ISDN BR0/0: RX <- INFORMATION pd = 8 callref = (null) Feature Indicate i = 0x8100 Jul 3 15:08:07.450: ISDN BR0/0: RX <- RELEASE_COMP pd = 8 callref = 0x8C. Relevant Config: interface Dialer16 description ISDN dial backup to John Doe bandwidth 56 ip address w.x.y.z+1 / 30 no ip directed-broadcast ip nat outside encapsulation ppp dialer remote-name JohnDoe dialer string (number) class top1r2 dialer pool 6 dialer-group 1 pulse-time 0 ppp authentication chap interface BRI1/5 description ISDN dial backup Group #6 bandwidth 56 no ip address no ip directed-broadcast encapsulation ppp dialer pool-member 6 isdn switch-type basic-ni isdn spid1 (x) isdn spid2 (y) no fair-queue ppp authentication chap map-class dialer top1r2 dialer idle-timeout 1800 dialer isdn speed 56 (interesting traffic defined as all TCP) -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71845&t=71845 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]