Robert, Kind of annoying isn't it? I looked a while ago and the short answer was it's not there and you can't do it. Some quick checking on Cisco's site showed that they might finally have released it in newer code though:
http://www.cisco.com/en/US/partner/products/hw/switches/ps637/prod_release_note09186a00800c8102.html#xtocid17 The release notes are for 12.0(5)WC5a, which might not even be the latest. Perhaps you just need to update your software? - Tom Robert Perez wrote: > Hi all, > > I am configuring Radius on a cat 3548 and I do not have the global config > "radius" command available. Anyone know what the commands ought to be to > create a server, key, etc.. Normally it is Radius-server key, radius-server > host.. Can't figure it out.. > > I have IOS 12.0(5.2)XU Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72009&t=71991 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]