Router# show interfaces serial1
Serial1 is up, line protocol is up
Hardware is HD64570
Internet address is 190.1.2.1/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
Reliability 255/255, txload 237/255, rxload 1/255
Encapsulation HDLC, loopback not set
Keepalive not set
Last input 00:00:22, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:17:58
Input queue: 0/75/0 (size/max/drops); Total output drops: 2479
Queueing strategy: random early detection(RED)
flows (active/max active/max): 8/9/16
mean queue depth: 27
drops: class random tail min-th max-th mark-prob
0 946 0 20 40 1/10
1 488 0 22 40 1/10
2 429 0 24 40 1/10
3 341 0 26 40 1/10
4 235 0 28 40 1/10
5 40 0 31 40 1/10
6 0 0 33 40 1/10
7 0 0 35 40 1/10
rsvp 0 0 37 40 1/10
30 second input rate 1000 bits/sec, 2 packets/sec
30 second output rate 119000 bits/sec, 126 packets/sec
1346 packets input, 83808 bytes, 0 no buffer
Received 12 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
84543 packets output, 9977642 bytes, 0 underruns
0 output errors, 0 collisions, 6 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
what is the meaning of "dcd=up"?
thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72175&t=72175
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
