hmm wonder if the config specifies a tftp boot of the image specified in
that error? Tried removingthe config?
Brian
The path to a desireable destination
is often more difficult than the path to stay where you are.
On Sat, 12 Jul 2003, Zsombor Papp wrote:
> Default solution is to boot up the image on the flash card, format
> bootflash, and copy a new bootloader image onto it, but you might need just
> remove a few files from bootflash: so that the bootloader is the first
> file. What does 'show bootflash:' show?
>
> Thanks,
>
> Zsombor
>
> At 08:23 AM 7/12/2003 +0000, Xy Hien Le wrote:
> >Hi everyone,
> >
> >I bought a 7206 router and it booted up as follow before booting by the
> Flash
> >Card contains IOS.
> >I think the internal flash device is missing or corrupted.
> >Anyone have any sugestion how I can fix this?
> >Here is the boot up output:
> >
> >System Bootstrap, Version 11.1(5) [mkamson 5], RELEASE SOFTWARE (fc1)
> >Copyright (c) 1994 by cisco Systems, Inc.
> >C7200 processor with 65536 Kbytes of main memory
> >
> >monlib does not contain a valid magic number
> >boot: cannot open "bootflash:"
> >an alternate boot helper program is not specified
> >(monitor variable "BOOTLDR" is not set)
> >and unable to determine first file in bootflash
> >loadprog: error - on file open
> >boot: cannot load "cisco2-C7200"
> >
> >And it will booted with the image installed in the Flash Card...
> >
> >Any sugestion is much apreciated.
> >
> >Xy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72190&t=72177
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
