The VLAN200 in "class-map match-all VLAN200" is just specifying the class-map-name. From the IOS docs: "Name of the class for the class map. The class name is used for both the class map and to configure policy for the class in the policy map." I believe you would use service-policy to attach it to a VLAN interface. You don't need "match-all" as you only have one match statement in the class-map.
class-map match-all VLAN200 Match access-group 103 policy-map VLAN200-policy class VLAN200 priority percent 75 class class-default fair-queue The above should set the minimum guaranteed bandwidth (Percent "Specifies that the amount of guaranteed bandwidth will be specified by the percent of available bandwidth") IF the traffic matches ACL 103, and if it does not match then it will default to the "class-default" and fall into using 256 dynamic queues (assuming the interface was > 512Kbps bandwidth). It's all in the IOS documentation. Fred Reimer - CCNA Eclipsys Corporation, 200 Ashford Center North, Atlanta, GA 30338 Phone: 404-847-5177 Cell: 770-490-3071 Pager: 888-260-2050 NOTICE; This email contains confidential or proprietary information which may be legally privileged. It is intended only for the named recipient(s). If an addressing or transmission error has misdirected the email, please notify the author by replying to this message. If you are not the named recipient, you are not authorized to use, disclose, distribute, copy, print or rely on this email, and should immediately delete it from your computer. -----Original Message----- From: Coy, Jason (Jason) [mailto:[EMAIL PROTECTED] Sent: Saturday, July 19, 2003 9:58 PM To: [EMAIL PROTECTED] Subject: class-map, access-lists, access-groups, and policy maps [7:72643] I have been looking for a simple explanation as to how the three relate and their dependencies. Example configuration from a show run: class-map match-all VLAN200 Match access-group 103 Does the above subject all VLAN200 traffic to access group 103? Is that access group associated with the access-list? policy-map VLAN200-policy class VLAN200 priority percent 75 class class-default fair-queue What does the above do, allocate a maximum bandwidth, or set a priority queuing? I have been looking for a good reference to QoS policy's and how to determine what the router has set. Any recommendations? Jason Coy Field Assistance Support Team, Chicago 708-233-4274 Office 888-461-1323 Pager 708-975-4274 Cell [GroupStudy removed an attachment of type image/gif which had a name of image001.gif] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72661&t=72661 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]