Hi all, I am wishing to implement port security on my 4006 + supIII using Version 12.1(13)EW1 I tried to enter the command SYD_CORE1(config)#int fastEthernet 5/14 SYD_CORE1(config-if)#switchport port SYD_CORE1(config-if)#switchport port-security max SYD_CORE1(config-if)#switchport port-security maximum 2 ? SYD_CORE1(config-if)#switchport port-security maximum 2 Command rejected: FastEthernet5/14 not an access port. I then confirmed my config for the port interface FastEthernet5/14 description a computer internal switchport access vlan 11 no snmp trap link-status Can any one tell me why I would get the error? I have tried this on a few ports now and got the same error every time. I looked on the cisco site and around deja, and found nothing about the error. Can any one provide some help John
********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. www.solution6.com ********************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72674&t=72674 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
