Well, interface VLAN100 really isn't a "layer 3" interface until you assign a layer-3 address to it...
Fred Reimer - CCNA Eclipsys Corporation, 200 Ashford Center North, Atlanta, GA 30338 Phone: 404-847-5177 Cell: 770-490-3071 Pager: 888-260-2050 NOTICE; This email contains confidential or proprietary information which may be legally privileged. It is intended only for the named recipient(s). If an addressing or transmission error has misdirected the email, please notify the author by replying to this message. If you are not the named recipient, you are not authorized to use, disclose, distribute, copy, print or rely on this email, and should immediately delete it from your computer. -----Original Message----- From: soft map [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 7:51 AM To: [EMAIL PROTECTED] Subject: How difference in Layer2 and Layer3 interface [7:72784] Hi I configure vlan 100 at vlan data mode,when I exit from vlan database mode, "sh run inter vlan 100", but I cant see any thing about vlan100, But sh vlan bri is ok. So I think the Vlan100 is Layer2 interface now. The next, Configure term inter vlan 100 end and now,the vlan100 was became layer3 interface? But I not configure any IP address at vlan100,is true? Thanks softmap Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72932&t=72784 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
