c. is incorrect because 1.) it doesn't overwirte the bandwidth setting, and 2.) the percentage may be lower or higher than 50.
b. is the correct answer. Thanks, Zsombor Ramesh Ram wrote: > > You are configuring EIGRP for NBMA operation. What is the > purpose of the ‘IP bandwidth-percent EIGRP’ command? > > a. It adjusts the percentage of bandwidth that EIGRP packets > can use > on all of the router’s interfaces. > b. It adjusts the percentage of bandwidth that EIGRP packets > can > use on an individual router interface. > c. It overwrites the bandwidth setting on an interface to > ensure that > EIGRP packets receive 50% of the available bandwidth on the > router’s interface. > d. It limits the % of bandwidth that EIGRP packets can use. The > percentage cannot exceed 50% of the configured bandwidth on > all of > the router’s interfaces. > > I am confused between answers b & c. Could someone clarify ? > > Ramesh Ram, CCNA Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73071&t=73068 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]