Did I miss a post? Where did ATM and Ethernet come into this? I thought we were talking about 3600 Ethernet interfaces, not network modules...
I don't know what type of traffic you're looking to sniff - obviously layer 2 since we're talking frames vs. cells, ATM vs. Ethernet, but if you're looking to MONitor a traffic from a non-source, non-destination workstation, wouldn't that indicate an RMON probe like NI's Observer? Using an RMON probe wouldn't require you to occupy the other router interface, just connected to that network on the switch or hub... Bill Creighton CCNP Network Design Engineer, eVPN AT&T Business Service Delivery NSPM 231 Martingale Road, Suite 800 Schaumburg, IL 60173-2008 Office: 847-407-4108 Fax: 847-598-6400 Mobile: 630-290-7000 [EMAIL PROTECTED] > -----Original Message----- > From: Reimer, Fred [mailto:[EMAIL PROTECTED] > Sent: Friday, August 01, 2003 11:32 AM > To: [EMAIL PROTECTED] > Subject: RE: Port Spanning (Monitoring) [7:73320] > > > I don't think that is logically possible. How are you going > to span ATM > cells onto Ethernet frames? A MUCH better facility would be > to specify a > chunk of memory and do a packet capture, which could be > filtered with an ACL > and downloaded with FTP or TFTP (either from or to an IOS box would be > acceptable to me). Then you could look at actual ATM cells, > given a decoder > that understood them... > > Fred Reimer - CCNA > > > Eclipsys Corporation, 200 Ashford Center North, Atlanta, GA 30338 > Phone: 404-847-5177 Cell: 770-490-3071 Pager: 888-260-2050 > > > NOTICE; This email contains confidential or proprietary > information which > may be legally privileged. It is intended only for the named > recipient(s). > If an addressing or transmission error has misdirected the > email, please > notify the author by replying to this message. If you are not > the named > recipient, you are not authorized to use, disclose, > distribute, copy, print > or rely on this email, and should immediately delete it from > your computer. > > > -----Original Message----- > From: alaerte Vidali [mailto:[EMAIL PROTECTED] > Sent: Friday, August 01, 2003 11:00 AM > To: [EMAIL PROTECTED] > Subject: RE: Port Spanning (Monitoring) [7:73320] > > It would be useful if the IOS guys added this facility. Specially for > monitoring ATM interfaces (sniffer ATM modules are really expensive). > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73364&t=73320 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com