Try sh isdn history or debug dialer. Prof. Tom Lisa, CCAI Community College of Southern Nevada Cisco ATC/Regional Networking Academy "Cunctando restituit rem"
"[EMAIL PROTECTED]" wrote: > I have sorted this out..it is now working. > > Is there a command in ISDN to view the number dialled? > I have connected an analogue telephone to the isdn modem and am using it of > the isdn line. > Is there a command for me to view the number I dialled and the statistics? > My Router is a 2600 with isdn ports and 1 ethernet. > > Tx > Pooven > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: 01 August 2003 09:58 AM > To: [EMAIL PROTECTED] > Subject: Has anyone configured a US Robotics Courier ISDN modem > [7:73333] > > Hi All, > > Has anyone configured a USRobotics courier ISDN/v.34 modem? > I managed to install the correct drivers and have done the test through the > USRobotics Courier I-modem Configuration Manager which results in a > successful check on the line to the ISDN 2600 router.However when I dial to > the router it errors with Error678 the remote computer did not respond. > Has anyone has any ideas on this ISDN modem as I suspest that some > configuration on the modem is wrong. > > Pooven Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73362&t=73362 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com