where have you configured your T1 card?? your line will remain down until you configure the T1 controller. -Nakul
""Michael Barnhart"" wrote in message news:[EMAIL PROTECTED] > I am pulling out my hair...any help or insights would be most appreciated... > > I have a main office, and 4 remote offices. The local telco has created a > point to point setup for me using a DACS. Basically, it takes a full T1 > from the main office and splits it into four 56k links (each on only one > timeslot) which go to the remote offices. There are plans to add more > remote offices later. > > I have installed a 805 with an Adtran 56/64 DSU at the remote sites (set to > 56) and a 1721 at the main office, with a T1 DSU WIC in it. > My configs are at the end... > > The problem is, it does not work. When I use a loopback plug on the 1721, > or the adtran, I can ping my serial interface properly. When the loopback > is removed, and the line installed, I cannot ping my local serial interface, > nor anything else. > > Please help! Thanks! > > Michael Barnhart > > Main Office Config: > > version 12.2 > service timestamps debug uptime > service timestamps log uptime > service password-encryption > ! > hostname mainoffice > ! > enable secret 5 > ! > ip subnet-zero > ! > ! > no ip domain lookup > ! > ! > ! > ! > ! > interface FastEthernet0 > ip address 192.168.1.10 255.255.255.0 > speed auto > full-duplex > no cdp enable > ! > interface Serial0 > description T-1 line to 56k links > ip address 192.168.254.253 255.255.255.252 > no keepalive > service-module t1 timeslots 1-4 speed 56 > no cdp enable > ! > interface Serial0.1 > description connection to office1 > bandwidth 56 > ip address 192.168.254.1 255.255.255.252 > no cdp enable > ! > interface Serial0.2 > description connection to office2 > bandwidth 56 > ip address 192.168.254.5 255.255.255.252 > no cdp enable > ! > interface Serial0.3 > description connection to office3 > bandwidth 56 > ip address 192.168.254.9 255.255.255.252 > no cdp enable > ! > interface Serial0.4 > description connection to office4 > bandwidth 56 > ip address 192.168.254.13 255.255.255.252 > no cdp enable > ! > ip classless > ip route 192.168.2.0 255.255.255.0 192.168.254.2 > ip route 192.168.3.0 255.255.255.0 192.168.254.6 > ip route 192.168.4.0 255.255.255.0 192.168.254.10 > ip route 192.168.5.0 255.255.255.0 192.168.254.14 > no ip http server > ! > ! > no cdp run > ! > ! > line con 0 > exec-timeout 0 0 > line aux 0 > line vty 0 4 > password 7 > login > ! > end > > > Remote Office Config: > > version 12.2 > service timestamps debug uptime > service timestamps log uptime > service password-encryption > ! > hostname office1 > ! > enable secret 5 > ! > ip subnet-zero > ! > ! > no ip domain lookup > ! > ! > interface Ethernet0 > ip address 192.168.2.10 255.255.255.0 > no cdp enable > ! > interface Serial0 > description connection to main office > ip address 192.168.254.2 255.255.255.252 > no keepalive > no cdp enable > ! > ! > ip classless > ip route 192.168.1.0 255.255.255.0 192.168.254.1 > no ip http server > ! > ! > no cdp run > ! > ! > line con 0 > exec-timeout 0 0 > line aux 0 > line vty 0 4 > password 7 > login > ! > end > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73423&t=73420 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
