thanks for your answer , I will try and let you know the results. regards, suaveguru --- [EMAIL PROTECTED] wrote: > GURU: > XAUTH is in my perception for authentication of > users, (local) escpecially > radius or tacacs. > > So what we do at the hub site for a static IKE peer > is disable XAUTH, so > that a spoke router does not get an auth prompt, or > the hub does not wait > for it. > > So I think the HUb is waiting for an answer, maybe > used to authenticate VPN > users only. > > > > WHAT DID YOU PUT AT THE SCREEN IKE PROPOSALS? You > need Preshareds keys > there! > 8. > The following example shows the various policies > used in the IKE policy > named "CiscoVPNClient-3DES-MD". > In this policy, Preshared Keys(XAUTH) for > Authentication Mode is being used > so that the client will be prompted to supply a > username and password at the > end of IKE negotiations. > > http://www.cisco.com/en/US/products/sw/secursw/ps2276/products_configuration > _example09186a008010edf4.shtml#task2_steps > > Martijn > > > > -----Oorspronkelijk bericht----- > Van: suaveguru [mailto:[EMAIL PROTECTED] > Verzonden: donderdag 7 augustus 2003 9:40 > Aan: Jansen, M > Onderwerp: RE: Strange VPN problem [7:73641] > > > thanks for your prompt reply , but I am using > easyvpn > configuration for cisco 805 router to concentrator > 3005 with the cisco 805 as client mode and > concentrator as hub . I can't find the line that you > indicate for my cisco 805 , could it be easyvpn > configuration that i am using? > > suaveguru > --- [EMAIL PROTECTED] wrote: > > Guru. > > > > Type the no-xauth behind the key-mapping. > > > > > > > > isakmp key **NEWKEYNEWCUSTO** address x.x.x.x > > netmask 255.255.255.255 > > no-xauth no-config-mode > > > > > > > > Martijn > > > > > > -----Oorspronkelijk bericht----- > > Van: suaveguru [mailto:[EMAIL PROTECTED] > > Verzonden: donderdag 7 augustus 2003 7:08 > > Aan: [EMAIL PROTECTED] > > Onderwerp: Strange VPN problem [7:73641] > > > > > > hi all, > > > > I am trying to setup a easy VPN solution for a > cisco > > 837 to a cisco VPN concentrator 3005 using network > > extension mode but I keep getting this error msg > > "Aug > > 7 13:08:16.571: EZVPN(mendelvpn): Pending XAuth > > Request, Please enter the following command: > > Aug 7 13:08:16.571: EZVPN: crypto ipsec client > > ezvpn > > xauth" > > > > Any form of input will be appreciated > > > > suaveguru > > > > __________________________________ > > Do you Yahoo!? > > Yahoo! SiteBuilder - Free, easy-to-use web site > > design software > > http://sitebuilder.yahoo.com > > **Please support GroupStudy by purchasing from the > > GroupStudy Store: > > http://shop.groupstudy.com > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > __________________________________ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > http://sitebuilder.yahoo.com
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73651&t=73641 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
