It sounds like you're trying to assign IP addresses from the same subnet to
two different interfaces, which you can't do. By definition, each interface
on a router needs to be in a different subnet.
HTH,
John
> Greetings,
>
> I've have a 2500 router, I was giving the Ethernet interface ip
> xxx.xxx.xxx.1, and the serial interface xxx.xxx.xxx.2. The router came
back
> with an error message the ip addresses are overlapping. Any idea why
this
> happens and can I force the router to accept it.
>
> Thank you,
>
> Nabil
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]