Can any one tell us how to block a default route? it is easy to block other routes by using ACL with distribution-list.... But how to remove the default route which is being advertised by " default-information originate always " command.
""Reimer, Fred"" wrote in message news:[EMAIL PROTECTED] > From the CCIE Power Session: > > "Unless a question says so, you are not permitted to use**: > > Static routes (of any kind) > > Default routes > > **Dynamic routes to null are permitted" > > Floating statics are also allowed: > > "ip route 2.2.2.0 255.255.255.0 1.1.1.2 240 > > * Uses a higher administrative distance so that dynamic protocols will take > precedence > > * Use only if explicitly allowed in a test question > > * Make sure the dynamic route actually exists when DDR is not active" > > HTH, > > Fred Reimer - CCNA > > > Eclipsys Corporation, 200 Ashford Center North, Atlanta, GA 30338 > Phone: 404-847-5177 Cell: 770-490-3071 Pager: 888-260-2050 > > > NOTICE; This email contains confidential or proprietary information which > may be legally privileged. It is intended only for the named recipient(s). > If an addressing or transmission error has misdirected the email, please > notify the author by replying to this message. If you are not the named > recipient, you are not authorized to use, disclose, distribute, copy, print > or rely on this email, and should immediately delete it from your computer. > > > -----Original Message----- > From: Shab Hanon [mailto:[EMAIL PROTECTED] > Sent: Tuesday, August 05, 2003 5:30 AM > To: [EMAIL PROTECTED] > Subject: OSPF summary address with Null 0 [7:73500] > > Hi everybody > The case .. OSPF summary address with Null 0 > > In all the case studies for CCIE R & S we told don't use static routes! **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html