We had this exact same problem on our network. Turned out to be a corrupt WINS database. However, since I am not in charge of the servers, and the guy who was still (1 year later) has not repaired the WINS database, the solution for me was to add a line in the lmhosts file pointing to the domain controller on the Win95/98 machines.
DCNAME #PRE #DOM:domainname ""Purwanto (PECTECH)"" wrote in message news:[EMAIL PROTECTED] > Quick questions: > 1. I can't login to nt domain server in network B (172.20.0.0/22) from > client in network A (172.20.8.253/24) especially from win95/98/me but it can > login from win2K/xp. > 2. I have wait dial tone for 5-6 seconds if I want to call from ext in A to > ext in B. Can you help me to solve both problems? > > > > > > Regards, > > Purwanto > > [GroupStudy removed an attachment of type application/octet-stream which had > a name of configuration.pps] > Roter-A#sh run > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug uptime > service timestamps log uptime > service password-encryption > ! > hostname PECTECH-Dumai > ! > enable password 7 082C454D1B161618141F > ! > ! > ! > ! > ! > ip subnet-zero > ip host dmi 172.20.8.253 > ip host krc 172.20.4.252 > ! > ! > ! > ! > voice-port 1/0/0 > input gain 9 > connection plar 94305 > description Connectio to Handset > ! > voice-port 1/0/1 > input gain 9 > connection plar 94306 > description Connectio to Handset > ! > voice-port 1/1/0 > input gain 9 > connection plar 94311 > description Connectio to Handset > ! > voice-port 1/1/1 > input gain 9 > connection plar 94415 > description Connectio to Handset > ! > ! > dial-peer voice 1 pots > destination-pattern 4305 > port 1/0/0 > ! > dial-peer voice 2 pots > destination-pattern 4306 > port 1/0/1 > ! > dial-peer voice 3 pots > destination-pattern 4311 > port 1/1/0 > ! > dial-peer voice 4 pots > destination-pattern 4415 > port 1/1/1 > ! > dial-peer voice 5 voip > destination-pattern 94305 > codec g728 > ip precedence 5 > no vad > session target dns:krc > ! > dial-peer voice 6 voip > destination-pattern 94306 > codec g728 > ip precedence 5 > no vad > session target dns:krc > ! > dial-peer voice 7 voip > destination-pattern 94311 > codec g728 > ip precedence 5 > no vad > session target dns:krc > ! > dial-peer voice 8 voip > destination-pattern 94415 > codec g728 > ip precedence 5 > no vad > session target dns:krc > ! > ! > interface Loopback0 > ip address 192.168.0.1 255.255.255.0 > no ip directed-broadcast > ! > interface FastEthernet0/0 > description Connection to LAN A > ip address 172.20.8.253 255.255.255.0 > no ip directed-broadcast > duplex auto > speed auto > ! > interface Serial0/0 > description Connection 128 K to B - > mtu 300 > bandwidth 128 > ip address 172.30.10.10 255.255.255.0 > no ip directed-broadcast > encapsulation ppp > no ip mroute-cache > no fair-queue > ppp multilink > ! > interface FastEthernet0/1 > no ip address > no ip directed-broadcast > shutdown > duplex auto > speed auto > ! > interface Virtual-Template1 > description Koneksi ke Pangkalan Kerinci > mtu 300 > ip unnumbered FastEthernet0/0 > no ip directed-broadcast > fair-queue 64 256 1 > ppp multilink > ppp multilink interleave > ip rtp reserve 16384 100 64 > ! > router rip > version 2 > network 172.20.0.0 > network 192.168.0.0 > ! > ip classless > ip route 0.0.0.0 0.0.0.0 Serial0/0 > ip route 0.0.0.0 0.0.0.0 172.20.4.252 > no ip http server > ! > ! > line con 0 > login > transport input none > line aux 0 > line vty 0 4 > password 7 1100170118010A18 > login > ! > no scheduler allocate > end > > Router-A#show voice port > > Foreign Exchange Station 1/0/0 > Type of VoicePort is FXS > Operation State is DORMANT > Administrative State is UP > No Interface Down Failure > Description is Connectio to Handset > Noise Regeneration is enabled > Non Linear Processing is enabled > Music On Hold Threshold is Set to -38 dBm > In Gain is Set to 9 dB > Out Attenuation is Set to 0 dB > Echo Cancellation is enabled > Echo Cancel Coverage is set to 8 ms > Connection Mode is plar > Connection Number is 94305 > Initial Time Out is set to 10 s > Interdigit Time Out is set to 10 s > Call-Disconnect Time Out is set to 60 s > Region Tone is set for US > > Analog Info Follows: > Currently processing unknown > Maintenance Mode Set to None (not in mtc mode) > Number of signaling protocol errors are 0 > Impedance is set to 600r Ohm > > Voice card specific Info Follows: > Signal Type is loopStart > Ring Frequency is 25 Hz > Hook Status is On Hook > Ring Active Status is inactive > Ring Ground Status is inactive > Tip Ground Status is inactive > Digit Duration Timing is set to 100 ms > InterDigit Duration Timing is set to 100 ms > > Foreign Exchange Station 1/0/1 > Type of VoicePort is FXS > Operation State is DORMANT > Administrative State is UP > No Interface Down Failure > Description is Connectio to Handset > Noise Regeneration is enabled > Non Linear Processing is enabled > Music On Hold Threshold is Set to -38 dBm > In Gain is Set to 9 dB > Out Attenuation is Set to 0 dB > Echo Cancellation is enabled > Echo Cancel Coverage is set to 8 ms > Connection Mode is plar > Connection Number is 94306 > Initial Time Out is set to 10 s > Interdigit Time Out is set to 10 s > Call-Disconnect Time Out is set to 60 s > Region Tone is set for US > > Analog Info Follows: > Currently processing unknown > Maintenance Mode Set to None (not in mtc mode) > Number of signaling protocol errors are 0 > Impedance is set to 600r Ohm > > Voice card specific Info Follows: > Signal Type is loopStart > Ring Frequency is 25 Hz > Hook Status is On Hook > Ring Active Status is inactive > Ring Ground Status is inactive > Tip Ground Status is inactive > Digit Duration Timing is set to 100 ms > InterDigit Duration Timing is set to 100 ms > > Foreign Exchange Station 1/1/0 > Type of VoicePort is FXS > Operation State is DORMANT > Administrative State is UP > No Interface Down Failure > Description is Connectio to Handset > Noise Regeneration is enabled > Non Linear Processing is enabled > Music On Hold Threshold is Set to -38 dBm > In Gain is Set to 9 dB > Out Attenuation is Set to 0 dB > Echo Cancellation is enabled > Echo Cancel Coverage is set to 8 ms > Connection Mode is plar > Connection Number is 94311 > Initial Time Out is set to 10 s > Interdigit Time Out is set to 10 s > Call-Disconnect Time Out is set to 60 s > Region Tone is set for US > > Analog Info Follows: > Currently processing unknown > Maintenance Mode Set to None (not in mtc mode) > Number of signaling protocol errors are 0 > Impedance is set to 600r Ohm > > Voice card specific Info Follows: > Signal Type is loopStart > Ring Frequency is 25 Hz > Hook Status is On Hook > Ring Active Status is inactive > Ring Ground Status is inactive > Tip Ground Status is inactive > Digit Duration Timing is set to 100 ms > InterDigit Duration Timing is set to 100 ms > > Foreign Exchange Station 1/1/1 > Type of VoicePort is FXS > Operation State is DORMANT > Administrative State is UP > No Interface Down Failure > Description is Connectio to Handset > Noise Regeneration is enabled > Non Linear Processing is enabled > Music On Hold Threshold is Set to -38 dBm > In Gain is Set to 9 dB > Out Attenuation is Set to 0 dB > Echo Cancellation is enabled > Echo Cancel Coverage is set to 8 ms > Connection Mode is plar > Connection Number is 94415 > Initial Time Out is set to 10 s > Interdigit Time Out is set to 10 s > Call-Disconnect Time Out is set to 60 s > Region Tone is set for US > > Analog Info Follows: > Currently processing unknown > Maintenance Mode Set to None (not in mtc mode) > Number of signaling protocol errors are 0 > Impedance is set to 600r Ohm > > Voice card specific Info Follows: > Signal Type is loopStart > Ring Frequency is 25 Hz > Hook Status is On Hook > Ring Active Status is inactive > Ring Ground Status is inactive > Tip Ground Status is inactive > Digit Duration Timing is set to 100 ms > InterDigit Duration Timing is set to 100 ms > Router-B#sh run > Building configuration... > > Current configuration : 2679 bytes > ! > version 12.1 > no service single-slot-reload-enable > service timestamps debug uptime > service timestamps log uptime > service password-encryption > ! > hostname PECTECH-KRC > ! > logging rate-limit console 10 except errors > enable secret 5 $1$QFXP$xzwq6vo.DY3DhWX.e2gA.. > ! > ip subnet-zero > ! > ! > no ip finger > ip host lo-dmi 192.168.0.1 > ip host krc 172.20.4.252 > ip host dmi 172.20.8.253 > ! > multilink virtual-template 1 > call rsvp-sync > ! > ! > ! > ! > ! > ! > ! > ! > interface Ethernet0/0 > no ip address > shutdown > half-duplex > ! > interface Serial0/0 > description Koneksi ke A > mtu 300 > bandwidth 128 > ip address 172.30.10.9 255.255.252.0 > encapsulation ppp > no ip mroute-cache > no fair-queue > ppp multilink > ! > interface Ethernet0/1 > ip address 138.32.8.252 255.255.252.0 secondary > ip address 172.20.4.252 255.255.252.0 > half-duplex > ! > interface Virtual-Template1 > description Koneksi ke A > mtu 300 > bandwidth 128 > ip unnumbered Ethernet0/1 > ip tcp header-compression iphc-format > max-reserved-bandwidth 100 > fair-queue 64 256 1 > ppp multilink > ppp multilink fragment-delay 20 > ppp multilink interleave > ip rtp header-compression iphc-format > ip rtp reserve 16384 100 64 > ! > router rip > version 2 > network 138.32.0.0 > network 172.20.0.0 > ! > ip classless > ip route 0.0.0.0 0.0.0.0 172.20.4.253 > no ip http server > ! > voice-port 1/0/0 > timeouts ringing 60 > connection plar 4305 > description Connect to PBX > pre-dial-delay 0 > ! > voice-port 1/0/1 > timeouts ringing 60 > connection plar 4306 > description Connect to PBX > pre-dial-delay 0 > ! > voice-port 1/1/0 > timeouts ringing 60 > connection plar 4311 > description Connect to PBX > pre-dial-delay 0 > ! > voice-port 1/1/1 > timeouts ringing 60 > connection plar 4415 > description Connect to PBX > pre-dial-delay 0 > ! > dial-peer cor custom > ! > ! > ! > dial-peer voice 1 pots > destination-pattern 94305 > port 1/0/0 > ! > dial-peer voice 3 pots > destination-pattern 94311 > port 1/1/0 > ! > dial-peer voice 4 pots > destination-pattern 94415 > port 1/1/1 > ! > dial-peer voice 5 voip > destination-pattern 4305 > session target dns:dmi > codec g728 > ip precedence 5 > no vad > ! > dial-peer voice 6 voip > destination-pattern 4306 > session target dns:dmi > codec g728 > ip precedence 5 > no vad > ! > dial-peer voice 7 voip > destination-pattern 4311 > session target dns:dmi > codec g728 > ip precedence 5 > no vad > ! > dial-peer voice 8 voip > destination-pattern 4415 > session target dns:dmi > codec g728 > ip precedence 5 > no vad > ! > dial-peer voice 2 pots > destination-pattern 94306 > port 1/0/1 > ! > ! > line con 0 > transport input none > line aux 0 > line vty 0 4 > password 7 1047071D0A04131F > login > ! > end > > Router-B#show voice port > > Foreign Exchange Office 1/0/0 Slot is 1, Sub-unit is 0, Port is 0 > Type of VoicePort is FXO > Operation State is DORMANT > Administrative State is UP > No Interface Down Failure > Description is Connect to PBX > Noise Regeneration is enabled > Non Linear Processing is enabled > Music On Hold Threshold is Set to -38 dBm > In Gain is Set to 0 dB > Out Attenuation is Set to 0 dB > Echo Cancellation is enabled > Echo Cancel Coverage is set to 8 ms > Playout-delay Mode is set to default > Playout-delay Nominal is set to 60 ms > Playout-delay Maximum is set to 200 ms > Connection Mode is plar > Connection Number is 4305 > Initial Time Out is set to 10 s > Interdigit Time Out is set to 10 s > Ringing Time Out is set to 60 s > Companding Type is u-law > Region Tone is set for US > > Analog Info Follows: > Currently processing none > Maintenance Mode Set to None (not in mtc mode) > Number of signaling protocol errors are 0 > Impedance is set to 600r Ohm > Wait Release Time Out is 30 s > Station name None, Station number None > > Voice card specific Info Follows: > Signal Type is loopStart > Number Of Rings is set to 1 > Supervisory Disconnect active > Hook Status is On Hook > Ring Detect Status is inactive > Ring Ground Status is inactive > Tip Ground Status is inactive > Dial Type is dtmf > Digit Duration Timing is set to 100 ms > InterDigit Duration Timing is set to 100 ms > Pulse Rate Timing is set to 10 pulses/second > InterDigit Pulse Duration Timing is set to 750 ms > Percent Break of Pulse is 60 percent > GuardOut timer is 2000 ms > > Foreign Exchange Office 1/0/1 Slot is 1, Sub-unit is 0, Port is 1 > Type of VoicePort is FXO > Operation State is DORMANT > Administrative State is UP > No Interface Down Failure > Description is Connect to PBX > Noise Regeneration is enabled > Non Linear Processing is enabled > Music On Hold Threshold is Set to -38 dBm > In Gain is Set to 0 dB > Out Attenuation is Set to 0 dB > Echo Cancellation is enabled > Echo Cancel Coverage is set to 8 ms > Playout-delay Mode is set to default > Playout-delay Nominal is set to 60 ms > Playout-delay Maximum is set to 200 ms > Connection Mode is plar > Connection Number is 4306 > Initial Time Out is set to 10 s > Interdigit Time Out is set to 10 s > Ringing Time Out is set to 60 s > Companding Type is u-law > Region Tone is set for US > > Analog Info Follows: > Currently processing none > Maintenance Mode Set to None (not in mtc mode) > Number of signaling protocol errors are 0 > Impedance is set to 600r Ohm > Wait Release Time Out is 30 s > Station name None, Station number None > > Voice card specific Info Follows: > Signal Type is loopStart > Number Of Rings is set to 1 > Supervisory Disconnect active > Hook Status is On Hook > Ring Detect Status is inactive > Ring Ground Status is inactive > Tip Ground Status is inactive > Dial Type is dtmf > Digit Duration Timing is set to 100 ms > InterDigit Duration Timing is set to 100 ms > Pulse Rate Timing is set to 10 pulses/second > InterDigit Pulse Duration Timing is set to 750 ms > Percent Break of Pulse is 60 percent > GuardOut timer is 2000 ms > > Foreign Exchange Office 1/1/0 Slot is 1, Sub-unit is 1, Port is 0 > Type of VoicePort is FXO > Operation State is DORMANT > Administrative State is UP > No Interface Down Failure > Description is Connect to PBX > Noise Regeneration is enabled > Non Linear Processing is enabled > Music On Hold Threshold is Set to -38 dBm > In Gain is Set to 0 dB > Out Attenuation is Set to 0 dB > Echo Cancellation is enabled > Echo Cancel Coverage is set to 8 ms > Playout-delay Mode is set to default > Playout-delay Nominal is set to 60 ms > Playout-delay Maximum is set to 200 ms > Connection Mode is plar > Connection Number is 4311 > Initial Time Out is set to 10 s > Interdigit Time Out is set to 10 s > Ringing Time Out is set to 60 s > Companding Type is u-law > Region Tone is set for US > > Analog Info Follows: > Currently processing none > Maintenance Mode Set to None (not in mtc mode) > Number of signaling protocol errors are 0 > Impedance is set to 600r Ohm > Wait Release Time Out is 30 s > Station name None, Station number None > > Voice card specific Info Follows: > Signal Type is loopStart > Number Of Rings is set to 1 > Supervisory Disconnect active > Hook Status is On Hook > Ring Detect Status is inactive > Ring Ground Status is inactive > Tip Ground Status is inactive > Dial Type is dtmf > Digit Duration Timing is set to 100 ms > InterDigit Duration Timing is set to 100 ms > Pulse Rate Timing is set to 10 pulses/second > InterDigit Pulse Duration Timing is set to 750 ms > Percent Break of Pulse is 60 percent > GuardOut timer is 2000 ms > > Foreign Exchange Office 1/1/1 Slot is 1, Sub-unit is 1, Port is 1 > Type of VoicePort is FXO > Operation State is DORMANT > Administrative State is UP > No Interface Down Failure > Description is Connect to PBX > Noise Regeneration is enabled > Non Linear Processing is enabled > Music On Hold Threshold is Set to -38 dBm > In Gain is Set to 0 dB > Out Attenuation is Set to 0 dB > Echo Cancellation is enabled > Echo Cancel Coverage is set to 8 ms > Playout-delay Mode is set to default > Playout-delay Nominal is set to 60 ms > Playout-delay Maximum is set to 200 ms > Connection Mode is plar > Connection Number is 4415 > Initial Time Out is set to 10 s > Interdigit Time Out is set to 10 s > Ringing Time Out is set to 60 s > Companding Type is u-law > Region Tone is set for US > > Analog Info Follows: > Currently processing none > Maintenance Mode Set to None (not in mtc mode) > Number of signaling protocol errors are 0 > Impedance is set to 600r Ohm > Wait Release Time Out is 30 s > Station name None, Station number None > > Voice card specific Info Follows: > Signal Type is loopStart > Number Of Rings is set to 1 > Supervisory Disconnect active > Hook Status is On Hook > Ring Detect Status is inactive > Ring Ground Status is inactive > Tip Ground Status is inactive > Dial Type is dtmf > Digit Duration Timing is set to 100 ms > InterDigit Duration Timing is set to 100 ms > Pulse Rate Timing is set to 10 pulses/second > InterDigit Pulse Duration Timing is set to 750 ms > Percent Break of Pulse is 60 percent > GuardOut timer is 2000 ms > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73888&t=73861 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html