PLease take every point I make seriously. Please also read the release notes that belong to the vpn client. I believe you when you say you can do everything.
Have you tried starting outlook (if you use exchange) or doing a rpc-ping, when doing net use do you get a logon screen. I have had RPC problems because of MTU/hardware>RPC settings once. Radius is a tip for the authentication of users on the access-device. No seperate user accounts, dial-in policies etc. Martijn -----Oorspronkelijk bericht----- Van: K. Bovermann [mailto:[EMAIL PROTECTED] Verzonden: vrijdag 8 augustus 2003 15:39 Aan: Jansen, M Onderwerp: AW: VPN Conncetion from Windows Client to nt domain [7:73720] the windows 2k client got the connection and I can ping around the network without any porblems. The client gets his ip from the concentrator (manually added ad the user configuration) I can map the drives manually without problems only the log on to the domain e.g. the script wont work.so I have to add them manually. When I try to authenticate the user name and password for the domain at the vpn concentrator it works with no problem. >From windows site it wont work. It is no problem with the ip adress or subnet mask or any permissions. Only the log on to the nt domain won4t work. We have no RADIUS Server at our domain. Will it work also with radius if I don4t have any radius server ?? Regards Kai -----Urspr|ngliche Nachricht----- Von: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED] Gesendet am: Freitag, 8. August 2003 15:26 An: [EMAIL PROTECTED]; [EMAIL PROTECTED] Betreff: RE: VPN Conncetion from Windows Client to nt domain [7:73720] Check: (off my hat, or cap whatever) access-lists netbios time kerberos dns maybe wins if you use it check bill's site dhcp give client dns maybe wins dhcp pool domain if 2k maybe add xtra subnet to site mmc sites and services route has the server a route to the concentrator AND to the VPN client subnet ping client from server, IP AND name route has the client route to server, host file? ping ip AND name from client Tip: always use radius. Tip2: READ THE "FEATURE" (RELEASE NOTES) LIST FROM THE EXACT VPN CLIENT VERSION NUMBER!!!!! Martijn -----Oorspronkelijk bericht----- Van: Kai Bovermann [mailto:[EMAIL PROTECTED] Verzonden: vrijdag 8 augustus 2003 14:05 Aan: [EMAIL PROTECTED] Onderwerp: VPN Conncetion from Windows Client to nt domain [7:73720] Dear all We have a cisco vpn concentrator 3000 series for vpn connection. What we want to do is to establish a vpn conncetion from a windows client(W2k or WinXP Pro) to the concentrator and then log on to our domain and then get the shares connected to the pc. I created a vpn connection and it works proberbly. Only the log on to the domain will not work. It should go like this way that the user is logged on to the pc and then if it is needed establish the vpn connection and get also logged on to the domain and get the shares connected to the pc. How can I do this ? Thanks a lot Kai **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73729&t=73720 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
