Shab Hanon wrote: > Hi , > > Can any one help. > > In case of ATM, how to figure out the VCD, VPI, VCI values?
The "new" ATM PVC configuration doesn't use the VCD. Unless it is your own private ATM the VPI/VCI will be assigned to you so nothing to figure there. Lots of examples on CCO, might look something like this: interface ATM1/0 no ip address atm scrambling cell-payload atm framing cbitplcp no atm ilmi-keepalive ! interface ATM1/0.32 point-to-point ip address 1.1.1.2 255.255.255.0 pvc madman 1/32 oam-pvc manage encapsulation aal5snap Dave > > How to find out the switch prefix for the ATM since we do not have access to > the ATM switch. > > > > Help plzzzzzzzz > > > > Best regards, > > Shab. > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74358&t=74345 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
