Please show us the topology database, that should tell us all. Martijn
-----Oorspronkelijk bericht----- Van: alaerte Vidali [mailto:[EMAIL PROTECTED] Verzonden: dinsdag 26 augustus 2003 0:10 Aan: [EMAIL PROTECTED] Onderwerp: Metric of OSPF Summary Routes [7:74361] Is there a way to define the metric of a OSPF summary route? This is strange, but two routers with the same IOS (and similar commands) are using different approaches: one router is using the highest metric of more specific routes, while the other router is using the lower metric. This one is using the higher metric: LS age: 1405 Options: (No TOS-capability, DC, Upward) LS Type: Summary Links(Network) Link State ID: 100.7.0.0 (summary Network Number) Advertising Router: rta LS Seq Number: 80016DE5 Checksum: 0x6A95 Length: 28 Network Mask: /16 TOS: 0 Metric: 1603 This one is using the lower metric: Routing Bit Set on this LSA LS age: 946 Options: (No TOS-capability, DC, Upward) LS Type: Summary Links(Network) Link State ID: 100.7.0.0 (summary Network Number) Advertising Router: rtb LS Seq Number: 80008D8C Checksum: 0x3E53 Length: 28 Network Mask: /16 TOS: 0 Metric: 0 The only difference is the platform: one is 7507 and the other 4700. **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74398&t=74361 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html