The SFM is a piece of junk...and not as useful as you might seem... The new Supervisor 720 has the SFM built-in...which greatly enhances its use..
-----Original Message----- From: neil K [mailto:[EMAIL PROTECTED] Sent: Friday, August 29, 2003 5:31 AM To: [EMAIL PROTECTED] Subject: Catalyst 6500 Architecture [7:74460] Folks, The Catalyst 6500 uses a Shared bus Architecture and to increase the Backplane capacity you have to have Switch fabric module (SFM) with fabric Enabled modules to make it work. Is there a vendor which has a better architecture or a better solution. Thanks, neil K. **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html ------------------------------------------------------------------------ For more information about Barclays Capital, please visit our web site at http://www.barcap.com. Internet communications are not secure and therefore the Barclays Group does not accept legal responsibility for the contents of this message. Although the Barclays Group operates anti-virus programmes, it does not accept responsibility for any damage whatsoever that is caused by viruses being passed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the Barclays Group. Replies to this email may be monitored by the Barclays Group for operational or business reasons. ------------------------------------------------------------------------ **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74534&t=74460 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html