i have a problem with ospf that someone may be able to help with. i have a 2500 connected to a 7500 via a frame (2500 end) to atm (7500 end) link. the 2500 is an abr for area 15 (serial area 0, ethernet area 15); the 7500 is an abr for area 14 (atm area 0, other interfaces area 14).
area 15 is configured as an nssa, as it is attached to another router which is redistributing static routes. area 14 is a standard ospf area, not stub or nssa. the 2500 (abr) is recieving type 7 lsas and converting them to type 5 and flooding them into area 0, no problems. the 7500 has them in its lsa database. the problem is that none of the type 5 lsas are being entered in the 7500s route table. i have run through everything i can think of, and i'm a bit stuck. the forwarding address of each lsa is 0.0.0.0. the network type is correct (ptp). the 7500 can reach the abr and the asbr. subnet masks are all correct. i'm not sure what to look for next... anyone? thomas Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74632&t=74632 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html