Guys, If I have a modem connected to the AUx port can can I harden the cisco so that it can make calls but will never be able to receive any calls? Here is kind of my config.. Thx,.
interface Async65 bandwidth 28 ip address 192.168.116.64 255.255.255.0 encapsulation ppp dialer in-band dialer idle-timeout 300 dialer wait-for-carrier-time 15 dialer map ip 172.20.241.1 dialer hold-queue 25 dialer-group 1 async default routing async mode interactive pulse-time 3 no cdp enable ppp authentication chap access-list 101 deny udp any any access-list 101 permit ip any any dialer-list 1 protocol ip list 101 line aux 0 exec-timeout 0 0 modem InOut modem autoconfigure discovery transport input all stopbits 1 speed 115200 flowcontrol hardware *************************************** | Bob Perez | | Intercept Payment Solutions | | [EMAIL PROTECTED] | | 100 West Commons BLVD | | New Castle, DE 19720 | | Phone: 302.326.0700 | | Cell: 302.420.6883 | | www.intercept.net | | | --------------------------------------- | | | | | | | :|: :|: | | :|||: :|||: | | ..:|||||||:...:|||||||:.. | | ___________________ | | C i s c o S y s t e m s | | CCNA CCNP MCSE NET+ | | | *************************************** Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74909&t=74909 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
