All- I have a CBOS IOS on a CISCO Router ( 600 series). I am trying to make this router a filter router. When I implement the rules below, nothing comes across. I have checked the documentation, but still can't find the solution. Does anybody have any ideas?
Your help is well appreciated.. set filter 0 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 1 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 2 on allow incoming eth0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 3 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol tcp set filter 4 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol icmp set filter 5 on allow outgoing all 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 protocol udp set filter 6 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 7 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 8 on allow incoming wan0-0 192.18.42.16 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp set filter 9 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 23 set filter 10 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol tcp srcport 1024-65535 destport 20 set filter 11 on allow incoming wan0-0 192.18.42.17 255.255.255.0 0.0.0.0 0.0.0.0 protocol icmp SRS Level 2 SRS Implementation Team Cell phone# 720-840-4887 SUN PH# 303-272-2661 Virtual Office# 303-604-0037 [EMAIL PROTECTED] [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=75265&t=75265 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html