Communications problem. I don't understand what you are asking. Try using more words. Be verbose. I may be able to understand then...
As far as I can tell: You are not having any problems discovering the 6509. It is in the topology. In your original messages, you said you were NOT getting the 6509 in the topology. See my confusion? Beyond that, I don't know what your problem is, so I can't suggest a solution. Just an off-the-wall guess, you probably need to load up the latest device information file (Incremental Device thingy) in CiscoWorks to recognize a particular module that may have been released recently... Fred Reimer - CCNA Eclipsys Corporation, 200 Ashford Center North, Atlanta, GA 30338 Phone: 404-847-5177 Cell: 770-490-3071 Pager: 888-260-2050 NOTICE; This email contains confidential or proprietary information which may be legally privileged. It is intended only for the named recipient(s). If an addressing or transmission error has misdirected the email, please notify the author by replying to this message. If you are not the named recipient, you are not authorized to use, disclose, distribute, copy, print or rely on this email, and should immediately delete it from your computer. -----Original Message----- From: milind tare [mailto:[EMAIL PROTECTED] Sent: Thursday, September 11, 2003 12:45 PM To: Reimer, Fred Cc: [EMAIL PROTECTED] Subject: RE: ciscoview-urgent [7:75227] hi reimer, Thanks for ur reply but not getting wht u want to say. coz i told u i install , CATIOS6000 , Entity , Switchaddlet, CLIparser still i can't see i mean it is coming intopology but with ? . so pls suggest me Thanks & Regards, Milind Tare --- "Reimer, Fred" wrote: > If you happen to be running PIM Sparse-Dense mode > with auto-RP and > "duplicate" loopback IP addresses then you need a > special patch for > CiscoWorks in order for it to properly discover the > 6509's... This probably > effects anything that has "duplicate" loopback IP > addresses. > > Fred Reimer - CCNA > > > Eclipsys Corporation, 200 Ashford Center North, > Atlanta, GA 30338 > Phone: 404-847-5177 Cell: 770-490-3071 Pager: > 888-260-2050 > > > NOTICE; This email contains confidential or > proprietary information which > may be legally privileged. It is intended only for > the named recipient(s). > If an addressing or transmission error has > misdirected the email, please > notify the author by replying to this message. If > you are not the named > recipient, you are not authorized to use, disclose, > distribute, copy, print > or rely on this email, and should immediately delete > it from your computer. > > > -----Original Message----- > From: milind tare [mailto:[EMAIL PROTECTED] > Sent: Thursday, September 11, 2003 4:54 AM > To: [EMAIL PROTECTED] > Subject: ciscoview-urgent [7:75227] > > Dear All, > > > In my network MPLS VPN is there and the cisco > devices having 7513,6509 and GSR. but in topology i > am > not getting 6509 which is having OSM-4ge-wan card > and > i can't detect the module in topology services. > i have installed related pathches like CLiparaser, > catios6000, switchaddlets etc...but still getting > problem ? is coming in topology services. > > please guide me urgently > > Thanks & Regards, > milind > > __________________________________ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > http://sitebuilder.yahoo.com > **Please support GroupStudy by purchasing from the > GroupStudy Store: > http://shop.groupstudy.com > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=75269&t=75227 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
