You could try adding the command service compress-config.
Warning. Be careful with this command, I've used it in the past on a 2501
running a 12.0 IOS release and the router wouldn't boot, managed to get it
back with a password recovery.
Regards,
_/ _/
_/ Steve Warner, Regional Network Engineer, GTS Netcom.
_/ _/
_/ +44 (0) 1344-395646 mailto:[EMAIL PROTECTED].
----- Original Message -----
From: "Chan Dovelet" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, August 15, 2000 11:03 AM
Subject: Configuration buffer full
> Hi,
>
> I am using Cisco 2501 as a router. The router is
> configured many access lists. One day, when I add the
> new access list, I found a error messages from the
> router:
>
> - Configuration buffer full
>
> What is the limitation of the configuration file? Is
> there any way to increase the buffer?
>
> Regards.
> Dovelet
>
>
> _________________________________________________________
> Do You Yahoo!?
> KOnO @yahoo.com.hk qll @ http://mail.yahoo.com.hk
> Get your free @yahoo.com.hk address at http://mail.yahoo.com.hk
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]