Hi
I have attached config from my 2611 router with ip http server configured.
Do you have any access-list configured?
Is your browser correct configured? Could be it is going directly to a
proxy.
Check routing table in computer. (ROUTE PRINT in Win NT)
Jon
Cisco2611#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 11.3(4)T1, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Wed 01-Jul-98 11:48 by phanguye
Image text-base: 0x80008084, data-base: 0x80552544
ROM: System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE
SOFTWARE (f
c1)
Cisco2611 uptime is 1 week, 6 days, 5 hours, 50 minutes
System restarted by reload at 08:17:27 UTC Wed Aug 2 2000
System image file is "flash:c2600-i-mz.113-4.T1", booted via flash
cisco 2611 (MPC860) processor (revision 0x202) with 12288K/4096K bytes of
memory
.
Processor board ID JAB02380CVM (3630199001)
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Cisco2611#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Cisco2611(config)#ip http server
Cisco2611(config)#^Z
Cisco2611#sh runn
Building configuration...
Current configuration:
!
! Last configuration change at 13:34:16 UTC Tue Aug 15 2000
! NVRAM config last updated at 14:12:13 UTC Mon Aug 14 2000
!
version 11.3
no service password-encryption
!
hostname Cisco2611
router eigrp 10
network 177.176.0.0
network 177.177.0.0
no auto-summary
!
ip http server
ip classless
no logging console
end
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Bilge Karabacak <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> ip http server does not work.
> I scanned the ports of the router. The open ports are 23 and 79. Router is
> directly connected to pc via a cross cable. what is the global config?
> Saying again:
> My router is cisco 2621. IOS software is C2600 Software
> (C2600-IO3S56I-M), Version 12.0(7)XK1, EARLY DEPLOYMENT RELEASE SOFTWARE
> (fc1)
>
>
>
> Eric Long wrote:
>
> > ip http server
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Bilge Karabacak
> > Sent: Tuesday, August 15, 2000 6:30 AM
> > To: [EMAIL PROTECTED]
> > Subject: Port 80
> >
> > Hello everbody,
> > What is the command to enable the HTTP server on the router? This is an
> > old question, but the command 'ip http server' does not work.
> > My router is cisco 2621. IOS software is C2600 Software
> > (C2600-IO3S56I-M), Version 12.0(7)XK1, EARLY DEPLOYMENT RELEASE SOFTWARE
> > (fc1)
> > Please help.
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
