If you have a CSV or Excel file of the list of routers with interfaces and IP
addresses, you can build your configs using mailmerge....I've only done this
with 30 routers at once...
Chris Stocker wrote:
> Is there away to make an access list to only allow telnet from the serial
> interface (ex: the /30 address on that interface) or default gateway, if the
> ip address or gateway isn't known. I want to know this because I have about
> 500 routers I need to put this on and I want to tftp a standard config to
> each one and the default gateway is different for them.
>
> Chris Stocker
> Network Admin - ISC
> Cablevision Systems
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
