> COnnecting two 2503's with a DCE to DTE serial cable to simulate a WAN > connection between 2 different subnets. I believe the maximum speed for > this type of connection is 4mbps? (Clock rate 4000000 setting on the > serial port that is acting as the DCE device) > > I have serached the cisco archives for information on beefing up this > connection, but I believe that this is the highest throughput you can get > with this type of connection....has anyone seen anything different? > > The other option that I am looking at is connecting the second serial port > on each router with the same type of cables and setting up load balancing > to get a total throughput of 8Mbps. Has anyone tried this and had any > success or failures? > > The cable that I am using is DB60-V35-V35-DB60. > > ANy other ideas to boost the bandwidth would be appreciated...or pointers > to the Cisco site...that I may have missed. > > THanks for the informative and interesting site......keep up the good work > everyone...and keep studying hard > > Cheers > > Douwe > Visit our Website : http://www.traveland.com.au Disclaimer - This message and any attachments are confidential and may contain privileged information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify Traveland Pty Ltd immediately by return email. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of Traveland Pty Ltd. ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
