Ken,
I had this on a 2621 when I was setting up AUX DDR via an attached modem. I
found that removing the
"modem autoconfigure discovery" command I had previously entered allowed me
to change the speed
from 9600 to 115200.
Hope this helps,
Regards
Pete S.
/DISCLAIMER
All the ususal legal rubbish means that if If your house burns down after
reading this, it's NOT my fault, OK!
/DISCLAIMER OFF
-----Original Message-----
From: kenny <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: 15 August 2000 12:57
Subject: Fail to change line speed
>Hi ,
>Any comments ?
>Will try to change the speed of the aux port , the router give me this
error ' fail to change line ' 1 speed '
>
>Please help
>
>Regards
>ken
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
