Hi,
You can also send your peer a gateway with a the MED command.
GIL
-----Original Message-----
From: Pablo Thoma [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 17, 2000 9:43 AM
To: [EMAIL PROTECTED]
Subject: Re: Default Route in BGP
Or you can use the router bgp config command:
default-information originate
which does the same as 1) but for all neighbors.
Luobin Yang wrote:
>
> I remember somebody mentioned how to create default routes in BGP4. I
> found the following way to inject default routes into BGP.
>
> 1. use the command default-originate. this command is used in the
> neighbor command. It originates a default route for the neighbor bgp
> speaker.
>
> 2. use the network 0.0.0.0 under bgp router configuration context, make
> sure the default route has been defined statically.
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
This email was scanned using ESPG @ PubliCom Haifa.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
