Let me explain.
There are several commands in IOS that use a
access-list to decide what to permit/deny, etc
(access-group, etc). You may be using several of these
commands in your configuration and they can point to
the same access-list # if you have a common rule set
up or different ACL #s if the rules are different. If
the rules are the same, it's easier to have 1
access-list for stuff and reference it with
access-group, etc then building the same ruleset on
every interface, etc.
Hope this helps.
Erick
--- nandit <[EMAIL PROTECTED]> wrote:
> Hi group,
> Why is there a access list and a access group
> command when we need to
> specify an access list to an interface.why do we key
> in access list in the
> config mode and access group in the interface config
> mode?
> Please clarify
> Bye
> nandit
>
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
