RE: Nic teaming

[Raees Ahmed Shaikh]

I had a bad experience with our compaq proliant 7000 one year back running NT Server 4.0, we used the teaming FEC there.  There were network access delays noticed by the clients, As I understand this feature is just to add the redundancy to your network card, that is incase of failure the Server can still be accessed by the other net cards,  At a given point of time only interface is set as TX/RX all the others are only RX. -----Original Message----- From: Muhammad [mailto:[EMAIL PROTECTED]] Sent: Monday, August 21, 2000 11:11 PM To: [EMAIL PROTECTED] Subject: Nic teaming   Hi all, My Customer has a Compaq Server  running Novell 5 connected to Cisco switch.He want to do Nic Teaming(FEC).He has three nics,two dual port and one single.He wants to remove the one with the single port and use two IP addresses on the two dual port NICs doing FEC  NIC teaming.He is using CPQANS.NLM. My question is could it be done and if so how.Pleas give any scenario.   Regards,   Muhammad