Do a show controller serial on the router that you set the clock rate on. Make
sure the output says that it is a DCE cable connected. If it says DTE, switch
your cable around.
Roman
At 12:28 PM 8/26/00 +0800, you wrote:
>Hi,there:
>
> I connected router 2611's serial0/0 to 2501's serial1 with a DTE to DCE
>cable, and set clockrate ,keepalive,encap HDLC. But they could not work yet.
>
> Who can help me ?
>
> Thanks in advance...
>
>
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
