Hi,
Their are two sets of values one is Cisco's default and the other is of
the RFC's.
Cisco:
Connect Retry: 120sec.
Hold-time: 90sc.
keepAlive: 30sec.
RFC:
ConnectRetry: 120sec.
Hold-time: 180sec.
KeepAlive: 60sec.
Gil
CCNA,CCDA
-----Original Message-----
From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]]
Sent: Sunday, August 27, 2000 10:52 PM
To: [EMAIL PROTECTED]
Subject: Re: hold time and keepalive interval in BGP?
>Does anybody know the default value of hold time and keepalive interval
>in BGP4?
>
Have you looked at the RFC?
What problem are you trying to solve by changing these timers?
There's quite a bit of thought that goes into the default values, and
it may be more appropriate to use other protocol mechanisms rather
than changing timers. Route flap dampening, for example, interacts
heavily with the keepalive and hold timers.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
This email was scanned using ESPG @ PubliCom Haifa.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
