I've had to use a special floppy for both LocalDirector and Pix password
recovery. You make the disk with a file in the Software Center.
If you crack the case open you'll see it's just a PII motherboard, with an AGP
slot!
"Fowler, Joey" <[EMAIL PROTECTED]> wrote:
I've been told be someone who attended the Cisco training course on PIX that
to do a password recovery on one you have to send it to Cisco for them to do
it. However looking on Cisco's Web site I found the Password Recovery
Procedure for PIX. The only one I have access to is in production so I can't
"test" this out. Comments will be appreciated.
Thanks,
Joey Fowler
Arthur Davis
Network Engineer
Altra Energy Technologies
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
