Hi All, Quick question about the NEXT_HOP attribute used in the BGP protocol... If the UPDATE packet cross EBGP link, the NEXT_HOP will be the IP address of source BGP speaker from AS. This will not change with in the AS. All BGP tablesin AS will have the same NEXT_HOP IP - but what will be used in the IP routing table. BGP first check if route to NEXT_HOP is in the local IP routing table.(sync enabled, ext..) Then what? Does it first look what the next hop ip address is in the IP routing table and use this IP for the routing table entry, OR does it add the IP routing table entry with the SAME NEXT_HOP attribute IP as all the BGP speakers in the AS have? Both make sense, but not sure which one will be used... it has to do a recursive lookup anyway! Thanks for your feedback Jacques Allison ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]