Are they not the port numbers?
-----Original Message-----
From: George Zhang
Sent: 31 August 2000 15:33
To: [EMAIL PROTECTED]
Subject: A question about IPSec
I read the following form Cisco documentation about IPSec:
"IKE uses UDP port 500. The IPSec ESP and AH protocols use
PROTOCOL
numbers 50 and 51. Ensure that your access-list are
configured so that
50, 51 and UDP port 500 traffic is not blocked ..."
My question is, what are the PROTOCOL numbers? This is the
first time I
read or heard about "PROTOCOL number"? I know many
protocols by names
such as TCP, UDP, ICMP etc, by I have never heard about
PROTOCOL
numbers? What protocols 50 and 51 are associated with?
Could someone
please explain that to me? Thanks.
George Zhang, CCNP
___________________________________
UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
http://www.groupstudy.com
Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> ************
****************************************************************************
The information in this e-mail is confidential to the ordinary user of the
e-mail address to which it was addressed. If you receive it in error, you
should not use or disseminate the information in it; instead, please e-mail
it back to the sender then delete the message from your system.
Internet communications are not 100% secure and it is the responsibility of
the recipient to ensure that this email has not been tampered with and that
its attachments are virus free.
****************************************************************************
> ************
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
