You may remember that a while back I was asking questions about using the BVI interface on a 2948G-L3. I got a ton of great feedback from the group, and as a result I am now successfully testing the 2948G-L3. My question now is as follows: I will be connecting the 2948G-L3 to a plain 'ol 2948G. I am going to use IRB as suggested by the group. How can I bridge non-IP traffic between the BVI interfaces? Specifically, I would like to bridge IPX and LLC traffic between the BVI interfaces (two at least), but route IP between them. On a router I've done this by placing the physical interfaces between which I want to bridge non-routed traffic (IPX and LLC) in the same bridge group. I'm at a loss as to how I can do this on the 2948G-L3. If I had to, I could certainly route IPX, but this still leaves me with the problem of bridging LLC between the BVI interfaces. Thanks in advance, Lorenzo ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]