For CISCO cable you may find bob at [EMAIL PROTECTED] who sales cicso
cable in ebay and should have solution to you.
Regards,
Fanglo
Weiping Mandrawa wrote:
> Hi Everyone,
> Anyone know what type of cable needed to connect
> back to back between Cisco 2500 Series and Cisco AGS+
>
> the serial port of 2500 series is DB60 Female DTE
> the serial port of AGS+ series is 25 Pin Female DCE
>
> If possible, can somebody point me the link
> for the pin assignment
>
> and when I do sh controllers mci, I got
> CscAGS#sh controllers mci
> MCI 1, controller type 2.0, microcode version 1.4
> 128 Kbytes of main memory, 4 Kbytes cache memory
> 23 system TX buffers, largest buffer size 1520
> Restarts: 0 line down, 0 hung output, 0 controller
> error
> Interface 0 is Serial0, electrical interface is
> RS-232 DCE
> 14 total RX buffers, 11 buffer TX queue limit,
> buffer size 1520
> Tx buffer in-use count is 0
> Transmitter delay is 0 microseconds
> High speed synchronous serial interface
>
> For the Help, I really appreciate it
> Thanks in advance
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Mail - Free email you can access from anywhere!
> http://mail.yahoo.com/
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
