Both side have this:
isdn switch-type basic-ni
isdn voice-call-failure 0
isdn tei-negotiation first-call
One side
interface BRI1/1
ip address x.x.x.x x.x.x.x
ip nat inside
encapsulation ppp
dialer map ip y.y.y.y name y broadcast yyyyyyy(first #)
dialer map ip y.y.y.y name y broadcast yyyyyyy(second #)
dialer load-threshold 10 either
dialer-group 1
isdn switch-type basic-ni
isdn spid1 xxxxxxxxxxxxxx xxxxxxx
isdn spid2 xxxxxxxxxxxxxx xxxxxxx
ppp authentication chap
ppp multilink
!
Other side:
!
interface BRI1/0
ip address y.y.y.y y.y.y.y
encapsulation ppp
dialer map ip x.x.x.x name x broadcast xxxxxxx(first #)
dialer map ip x.x.x.x name x broadcast xxxxxxx(second #)
dialer load-threshold 1 outbound
dialer-group 1
isdn switch-type basic-ni
isdn spid1 yyyyyyyyyyyyyy yyyyyyy
isdn spid2 yyyyyyyyyyyyyy yyyyyyy
ppp authentication chap
ppp multilink
!
This is the ISDN status : The other side is the same except
both spids are valid!
Global ISDN Switchtype = basic-ni
ISDN BRI1/0 interface
dsl 8, interface ISDN Switchtype
= basic-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 73, Ces = 1, SAPI
= 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 74, Ces = 2, SAPI
= 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI 73, ces = 1, state =
5(init)
spid1 configured, spid1 NOT sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 40, tid = 1
TEI 74, ces = 2, state
= 4(await init)
spid2 configured, spid2 sent, spid2 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 8 CCBs = 0
The Free Channel Mask: 0x80000003
Help!
Andre
--
Andre Fecteau
Unix Software Engineer
[EMAIL PROTECTED]
CNE3, 4 & CCNA