&D3 causes the modem to hang up the call, but will not cause the router to
reset the session. If you want to dial in again, you have to connect to the
router and type clear line X where x is the async port the modem is
connected to.
----Original Message Follows----
From: "Yee, Jason" <[EMAIL PROTECTED]>
Reply-To: "Yee, Jason" <[EMAIL PROTECTED]>
To: "'Kane'" <[EMAIL PROTECTED]>, "cisco@groupstudy. com (E-mail)"
<[EMAIL PROTECTED]>
Subject: RE: problems with modem commands
Date: Thu, 7 Sep 2000 04:34:04 -0500
thank you , but your explanation can it be a bit more simpler ?
Assume I am a layman
Jason
-----Original Message-----
From: Kane [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 07, 2000 5:19 PM
To: Yee, Jason; cisco@groupstudy. com (E-mail)
Subject: Re: problems with modem commands
Because a DTR drop will result in the modem resetting to the same state as
if an ATZ(n) command had been received . Depending on the &Q(n) settings ,
this could potentially result in disabling dial-in to the modem , and an
invalid modemcap entry.
Rgrds
----- Original Message -----
From: "Yee, Jason" <[EMAIL PROTECTED]>
To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]>
Sent: Thursday, September 07, 2000 5:10 PM
Subject: problems with modem commands
>
> hi all,
>
> I read the BCRAN course materials and there is one line under
> troubleshooting modem autoconfiguration that I do not quite understand
that
> I need all of your help :
>
> It goes this way :
>
> If you configured your own modemcap entry and reconfiguraton appears to
> function , verify that DTR attribute is not set to &D3 , why is that so??
>
>
> Jason
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
