you can also use "tftpdnld" which will use the first ethernet interface, even if
the port isn't recognized. It's actually easy to do. Do a search on CCO on
"tftpdnld". Let me know if you have problems finding it and I'll look.
Brian
Scott wrote:
> Heya Jim
>
> If you are in the boot mode you can still tftp but if your ethernet card is a
> FE the boot mode will not recognize it so you will need to go over your serial
> link (I hope you have one!) or a regular ethernet card.
>
> If you are in the ROMMON mode there isnt a lot you can do unless you know
> someone with a 4000 or are James Bond..
>
> Scotty
>
> Jim Bond <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I accidentally erased my 4000 router flash and can't
> boot up. It didn't recognize my ethernet port so won't
> boot from net.
>
> How do I recover the IOS?
>
> Thanks in advance.
>
> Jim
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Mail - Free email you can access from anywhere!
> http://mail.yahoo.com/
>
> _______________________________________________________
> To unsubscribe from the CCIELAB list, send a message to
> [EMAIL PROTECTED] with the body containing:
> unsubscribe ccielab
>
> ____________________________________________________________________
> Get free email and a permanent address at http://www.netaddress.com/?N=1
>
> _______________________________________________________
> To unsubscribe from the CCIELAB list, send a message to
> [EMAIL PROTECTED] with the body containing:
> unsubscribe ccielab
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
