so, would 1 bit time for fast ethernet be 1/100,000,000 seconds and 92 bit times 92/100,000,000 seconds?
igor
Ejay Hire <[EMAIL PROTECTED]> wrote:
A bit time is the minimum width of a 1 pulse on a network medium.
i.e. The first part of an ethernet preamble is a 64 bit on/off/on/off
pattern to synchronizes recievers at the physical layer. This 64 bit
preamble is exactly 64 bit-times. Bit times vary by Physical/MAC layer
protocols. i.e. 16mbps Token ring's bit time is 4 times shorter than 4mbps
token ring because it transmits 4 times as much data in the same timeslot.
----Original Message Follows----
From: John lay <[EMAIL PROTECTED]>
Reply-To: John lay <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Class 2 Fast Ethernet repeater
Date: Thu, 7 Sep 2000 01:47:21 -0700 (PDT)
Guys,
On the CCDA book it is mentioned that "Class 2 Fast Ethernet repeaters have
a maximum delay of 92 bit times"
Is this means that the maximum allowed delay is 92 bit per second ?
What is! bit times ?
Thanks a lot....
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!