hi,
i can ping the servers from the PIX , but not the virtual IP ... the servers
are not directly plugged in the LD .. there is a common switch for the LD
interface,the PIX internal interface and the servers as they all are in the
sane network. one thing i want is that should i plug in one more interface
of the LD in the same network as right now i have only one interface into
this network.
regds
Pushkar
"Jeffrey Eiber" <[EMAIL PROTECTED]> wrote in message
news:8pb024$fo2$[EMAIL PROTECTED]...
> I didn't notice anything obviously wrong with your config. This may sound
> obvious, but the LD uses a regular old NIC. If your servers are plugged
> directly into the LD, you must use a crossover cable. For troubleshooting
> only, allow any port to pass through the local director. Then lock it
down
> to 80/443 after everything is working. Try ping your servers from the LD,
> and try to ping the LD from the PIX DMZ interface. Do a 'show real' and
> 'show virtual' to get some better info than the config.
>
> Let me know how you do from here.
>
> Jeff
>
> ""Pushkar Shirolkar"" <[EMAIL PROTECTED]> wrote in message
> 8p97ca$mco$[EMAIL PROTECTED]">news:8p97ca$mco$[EMAIL PROTECTED]...
> > hi friends,
> > i have a strange prob. i have a cisco load director 416 ... and have a
> very
> > simple config. i have a firewall whose one interface is to the internet
> and
> > one to the internal n/w ... as usual .. nothing diff. ..... and inside
on
> > the n/w i have one load director and 2 web servers which i want to load
> > balance ...
> >
> > i have natted the virtual IP in the firewall to a public IP .. and
opened
> > port 80 for incoming hits .... now this virtual IP is bound to the 2 web
> > servers ...
> >
> > but the prob is that i donot get any inbound connections from outside ..
> > also when i tried to telnet to port 80 of the virtual IP from inside
also
> ..
> > i'm unable to do so ...
> >
> > also i have connected only one ethernet cable from the first ethernet
> > interface on the LAN .. do i have to connect another cable from the
second
> > interface even though they are in the same n/w ??
> >
> > please can anyone help out ... this is ans SOS situation ..
> > the config file is below .. please take a look ...
> >
> > Pushkar
> > ---------------------------------------------------
> > : Saved
> > : LocalDirector 416 Version 3.1.4
> > syslog output 20.3
> > no syslog console
> > enable password 4d9b64f9ab66474af34252545443b8 encrypted
> > hostname web_ld
> > no shutdown ethernet 0
> > no shutdown ethernet 1
> > shutdown ethernet 2
> > interface ethernet 0 auto
> > interface ethernet 1 auto
> > interface ethernet 2 auto
> > mtu 0 1500
> > mtu 1 1500
> > mtu 2 1500
> > multiring all
> > no secure 0
> > no secure 1
> > no secure 2
> > no ping-allow 0
> > no ping-allow 1
> > no ping-allow 2
> > ip address 172.16.0.254 255.255.255.0
> > no rip passive
> > rip version 1
> > failover ip address 0.0.0.0
> > no failover
> > password cisco
> > snmp-server enable traps
> > no snmp-server contact
> > no snmp-server location
> > virtual 172.16.0.253:80:0:tcp is
> > virtual 172.16.0.253:443:0:tcp is
> > real 172.16.0.4:80:0:tcp is
> > real 172.16.0.10:80:0:tcp is
> > name 172.16.0.4 web1
> > name 172.16.0.10 web2
> > name 172.16.0.253 domain
> > bind 172.16.0.253:80:0:tcp 172.16.0.4:80:0:tcp
> > bind 172.16.0.253:80:0:tcp 172.16.0.10:80:0:tcp
> > : end
> >
> >
> > **NOTE: New CCNA/CCDA List has been formed. For more information go to
> > http://www.groupstudy.com/list/Associate-Announcement.html
> > _________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associate-Announcement.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associate-Announcement.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
