Just connect the 25-pin null modem cable that came with your console kit to
your box and then use a straight through cable to your console port. I have
my lab set up like that at home. Then if I want to access it remotely I
telnet to my solaris box and use tip to connect to my routers. This gives
me a remote console connection and I can still use the ethernet on my
terminal server for something else.
Regards,
Aaron K. Dixon
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
zhi huan
Sent: Friday, September 08, 2000 11:48 PM
To: [EMAIL PROTECTED]
Subject: Solaris station connect to the console?
I have a Solaris workstation, how to connect the router console port through
serial port?
Thanks in advance,
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
