I am having some problems with a Cisco Switch. When I boot it, I get the following info: -- C2900XL Boot Loader (C2900-HBOOT-M) Version 11.2(8)SA1, RELEASE SOFTWARE (fc1) Compiled Tue 03-Feb-98 14:59 by rheaton starting... Base ethernet MAC Address: 00:90:2b:b8:3a:c0 Xmodem file system is available. Initializing Flash... flashfs[0]: 1 files, 1 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 1728000 flashfs[0]: Bytes used: 1536 flashfs[0]: Bytes available: 1726464 flashfs[0]: flashfs fsck took 2 seconds. ...done Initializing Flash. Loading "flash:c2900XL-h-mz-112.8-SA1"...flash:c2900XL-h-mz-112.8-SA1: no such f ile or directory Error loading "flash:c2900XL-h-mz-112.8-SA1" Interrupt within 5 seconds to abort boot process. Boot process failed... The system is unable to boot automatically. The BOOT environment variable needs to be set to a bootable image. switch: --------------------------------------------------- There is obviously no file named flash:c2900XL-h-mz-112.8-SA1. There is no IOS in the flash at the moment. I am trying to transfer over an IOS file from the TFTP server, but get the following output: switch: copy tftp:c2900XL-c3h2s-mz-120.5-XU.bin flash:c2900XL-c3h2s-mz-120.5-XU.bin tftp:c2900XL-c3h2s-mz-120.5-XU.bin: permission denied switch: or switch: copy tftp://25.6.104.111/c2900XL-c3h2s-mz-120.5-XU.bin flash:c2900XL-c3h 2s-mz-120.5-XU.bin tftp://25.6.104.111/c2900XL-c3h2s-mz-120.5-XU.bin: permission denied --------------------------------------------------- The file is there, and I CAN take it off the TFTP server with the C2924-XL-EN Switch that I have. There are both connected together through the same hub. I was also told to try the following: switch: format flash: Are you sure you want to format "flash:" (all data will be lost) (y/n)?y flashfs[0]: 0 files, 1 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 1728000 flashfs[0]: Bytes used: 1024 flashfs[0]: Bytes available: 1726976 flashfs[0]: flashfs fsck took 2 seconds. Filesystem "flash:" formatted switch: --------------------------------------------------- Other Outputs: switch: version C2900XL Boot Loader (C2900-HBOOT-M) Version 11.2(8)SA1, RELEASE SOFTWARE (fc1) Compiled Tue 03-Feb-98 14:59 by rheaton switch: switch: ? ? -- Present list of available commands boot -- Load and boot an executable image cat -- Concatenate (type) file(s) copy -- Copy a file delete -- Delete file(s) dir -- List files in directories flash_init -- Initialize flash filesystem(s) format -- Format a filesystem fsck -- Check filesystem consistency help -- Present list of available commands load_helper -- Load and initialize a helper image memory -- Present memory heap utilization information mkdir -- Create dir(s) more -- Concatenate (display) file(s) rename -- Rename a file reset -- Reset the system rmdir -- Delete empty dir(s) set -- Set or display environment variables trap -- Cause a software breakpoint to occur type -- Concatenate (type) file(s) unset -- Unset one or more environment variables version -- Display boot loader version -- MORE -- switch: THANKS FOR YOUR HELP!!!!!!!!! **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
