Sanjay,
What duplex/speed settings do you have the switch configured at? Is it
set to autonegotiate? What ports is the customer connected to? Are there
any error counters that are incrementing.
You could manually set the speed on a single port of the switch and
connected end device and then do a test with data transfer and see what
is happening. Often in these cases you will find it to be a speed/duplex
mismatch between the end device.
Hope this helps,
_______________________________
Dinesh Pul'Andram
Customer Support Engineer
Service Provider Support Group
cISCO Systems AsiaPacific
P: 61-2-8448.7616
E: [EMAIL PROTECTED]
M: 61-2-0408.202.439
W: http://www.cisco.com.au
_______________________________
Sanjay Shah wrote:
>
> Hi
> I have installed 2924 Switch in client network at the place of hub and after
> few days client complaining slow performance.Client is saying performance
> was better with Hub.
>
> Can anybody guide me to resolve this problem.
>
> Thanks
>
> Sanjay
> Network Enginner
> AmNet
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
