Make sure to enable spantree portfast. The slowness might be caused by the
spanning tree algorithm. It takes 15-30 seconds to initialize, and start
forwarding (i.e DHCP request).
I don't know if this is an option on the 2900 series switch, but its worth a
shot.
Example:
set spantree portfast <port num> enable
Thanks,
Steve
-----Original Message-----
From: Paul Werner [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 12, 2000 9:29 AM
To: [EMAIL PROTECTED]
Subject: Re: Cisco Certification Digest V2 #635
> I have installed 2924 Switch in client network at the place
of hub and
> after
> few days client complaining slow performance.Client is saying
> performance
> was better with Hub.
>
> Can anybody guide me to resolve this problem.
A couple of thoughts on this subject:
It will likely be fruitless to theorize what is the possible
problem in the absence of a configuration file for this
device. If you go to priviledge mode and do a "show run," and
remove the passwords and other confidential information, that
would be much easier to troubleshoot. Additionally, since this
is an IOS based switch, you will also need to do a "show vlan"
command and post those results as well, because this
information is *not* available at the running config. If you
have access to a web server, it is much more bandwidth friendly
to post your running config and show vlan results to a web
server and post a URL to this list for inspection.
In the absence of seeing a valid config mentioned above, I
would state that all previous posters on this topic have hit
upon the major items. They include such areas as hard coding
your speed and duplex (except when the speed or duplex settings
may vary, such as for laptops), enabling portfast (where
appropriate), ensuring that all ports are on the same VLAN (you
did not mention if this was a new switch or one that was
previously used/configured).
HTH,
Paul Werner
________________________________________________
Get your own "800" number - Free
Free voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
