This is not ISDN, but just redundant links to campus switches. Has nothing
to do with dial-up, but Ethernet.
-----Original Message-----
From: Feliz, Edgar [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 12, 2000 3:13 PM
To: Lewis, John M; '[EMAIL PROTECTED]'
Subject: RE: I just don't understand...
If it is ISDN try "Dialer load-threshold ?" Where ? = a value from 1-255.
EF
-----Original Message-----
From: Lewis, John M [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 12, 2000 5:56 PM
To: '[EMAIL PROTECTED]'
Subject: I just don't understand...
Is there a way to set a threshold on a redundant link? What I mean to ask
is if I have the following:
Switch "X" and Switch "Y" which has 4 channeled lines to each other for
redundancy and 3 of the lines go down Switch "Y" will still think that "X"
is up and will not kick in. How would I set a minimum bandwidth threshold?
What I am looking for is something like, for lack of a better word Bandwidth
on Demand for 802.3.
I hope this makes some sense to someone, as I would really like to know how
this is done.
BTW, X and Y are 5505's
Thanks for your help in helping me to understand.
John
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]