The answer is B. Custom queueing will not fragment the packets. It will
send the entire packet, even if it passed the byte count. Then it will go
on to the next queue.
Darren
--------------------------
Darren House
Internet Systems Engineer
UUNET, A World Com Company
703-886-6641
[EMAIL PROTECTED]
On Wed, 13 Sep 2000, Doug Laing wrote:
> Here is another study question for clarification. Assume the following
> configuration:
>
> queue-list 1 protocol ip 1
> queue-list 1 protocol ipx 2
> queue-list 1 protocol appletalk 3
> queue-list 1 protocol ip 4 tcp 20
> queue-list 1 default 5
> queue-list 1 queue 1 byte-count 4500
>
> A) Once the byte count in Queue 1 is reached while transmitting a
> packet, the data is sent, then the router immediately goes to Queue 2.
>
> B)Once the byte count in Queue 1 is reached while transmitting a packet,
> the entire packet is sent, then the router immediately goes to Queue 2.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
