If you configured the enable secret password as a fallback in your config,
then you should supply the enable secret password
Geoffrey
----- Original Message -----
From: "Muralidhar A." <[EMAIL PROTECTED]>
To: "cisco freinds" <[EMAIL PROTECTED]>
Sent: Wednesday, September 13, 2000 4:13 PM
Subject: Radius !!
> hi
>
> well i configured radius and things were smooth untill now... the radius
> server has crashed and now the router does not allow anyone to login... it
> asks for a password and tells rejects it.. even from the console port...
to
> worsen things i don't know what ports were used? and what was the key
> word... now what do i do ? has anyone come across this situ ? if yes what
> to do in this case...
>
> Well as far as my knoledge goes i am thinking of breaking this password on
> the router and reconfigure the whole stuff. is there any other
> alternative... ?
>
> murali
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
